AVer EH6216H+ user manual - Manual (Page 44)

36
Name Function
(18) De-interlace To enhance the video quality. Set the de-interlace mode to #1, if you are capturing
motionless picture and #2, if it captures lots of movement.
i
The de-interlace function only support on analog camera channel in single screen display mode.
(19) Turbo To improve the smoothness of live video. The default is enabled( ), but in following
situation:
- The channel is IPCam and is in 1 single screen.
- The channel is remote DVR and is in 1 single screen.
Turbo function setup is independent for each channel. To turn off turbo function ( ), click
turbo button.
[Note] In multiple split screen mode, the turbo button is gray out.