AVer EH6216H+ user manual User Manual
Page 70
62
- Name
Click Edit to change the camera name.
i
DVR supports Chinese characters on remote site (remote setup).
- Description
Add a short comment
(5) IP Camera Information
To setup IP camera and display current IP camera information.
Using IP Camera Motion: Enable to use the motion detection function of IP camera if the IP camera has
support motion detection and the motion recording will based on IP camera
’s motion detection setting.
1. Click Add IPCam to add the IP camera.
2. Click the radio button of Protocol to start setup IP camera.
3. Select the Protocol, Model, Video Format, and Channel of the IP camera. Otherwise, user can use
Search Device button to find the IP cameras(see also Using Search Device to connect IP camera).
4. Enter IP address and connecting port in IP Camera Site column.
Search Device: If use doesn
’t know any IP cam protocol, click Search Device button to find the IP
cameras that can be detected on your LAN network; not all IP camera on your LAN network can be
found (also see
For supported IP camera list, please refer to the IP camera support list on web site
(http://surveillance.aver.com/).
5. Also, user can enter URL of IP camera instead of IP address.
User only can choose use Protocol or URL one at a time;
can’t choose both at the same time.
6. If the IP camera has authority request, please enable Authentication and enter ID and Password.
7. Click OK to connect with the IP camera.