AVer EH6216H+ user manual User Manual

Page 33

CHAPTER 1

7. After firmware upgrade is completed, the DVR system will check the files of Update folder and if

configuration file and IP camera patch file has found, then, the import and upgrade procedure will be
processed.

8. After all procedures have completed, the Reboot window is show up. Click Reboot button and remove the

USB pen drive from DVR unit to restart DVR system.

The DVR system will reboot au

tomatically if Reboot button hasn’t been click for a period time.

Remember to remove USB pen drive after click reboot button; otherwise, the DVR system will start
upgrade process again.

9. After reboot, user can go to Setup >> System to check the version of firmware and make sure the upgrade

process is successful.

If file is not found, the message
is displayed it.

The message displayed the IP
camera path or import configuration
file that contains in Update folder
has been upgraded or imported.

This manual is related to the following products: