AVer EH6216H+ user manual - Manual (Page 11)

3
CHAPTER 1
1.2 Front Panel
1.2.1 EH6108H
+
/EH6216H
+
Name Function
(1) System indicator
- Power indicator (left): System power status indicators. Lights when the system is
running.
- Record indicator (right): When DVR system is recording, the light will keep flashing.
(2) IR Sensor port For extended IR sensor cable connection(optional)
(3) IR Sensor Receive signal from the remote controller to operate the DVR unit
(4) Power Power ON/OFF DVR unit
(5) DVD-ROM/HDD
Tray
- DVD-ROM: To backup the recorded file to DVD
± R/DVD± RW disk
- HDD Tray: To install one hard disk.
i
- CD-R/RW is not supported.
- EH6108H
+
and EH6216H
+
support DVD-ROM or HDD tray that depends on user
has purchased.
(6) To start recording video
(7) To reset alarm status
(8) Switch to playback mode or preview mode
(9) Call out system setup menu on preview mode
(10) Control Buttons
Move to left direction on cursor control
To move PTZ camera lens to left in PTZ mode
Move to right direction on cursor control
To move PTZ camera lens to right in PTZ mode
Move to up direction on cursor control
To move PTZ camera lens to up
Move to down direction on cursor control
To move PTZ camera lens to down
Confirm or make a selection