AVer EH6216H+ user manual - Manual (Page 80)

72
(2) Enable
Set to enable/disable the selected camera. When there is no video source on the camera, we suggest
disabling it so that the system won’t detect it as video loss error.
(3) Input
Select the camera type as Remote DVR.
(4) Camera
- Display
Enable/disable to show the video. Even if the video of the selected camera is hidden you can still record
the video and preview it in playback mode.
- Enable Audio
When camera type is Remote DVR, the audio is not supported.
- Name
Change the camera name
- Description
Add a short comment
- IP
Enter the IP address of the camera
- Port
The port for connection
- User ID
Enter the user id that for connecting authority
- Password
Enter the password that is for connecting authority
- Channel
Select the channel of connected camera
- Connect
Click to connect the camera when all configurations are set.
(5) IP Camera Resolution Status
i
The total resolution values are including both IP camera channel and Remote DVR channel.
It displays the each IP camera channel ’s current resolution value that is calculated and transformed by DVR
system. The 16 MP is divided into 8MP each for odd and events channels. When the total resolution value is
over 8MP, the Used and Unused value text is displayed in red color.