AVer EH6216H+ user manual - Manual (Page 106)

98
- PTZ preset point
Position the PTZ camera based on the preset point setting.
Beside the PTZ preset point check box, click Detail. In the
Trigger PTZ Preset Setting dialog box, select the PTZ camera
number then select the Enable check box. Select the position of
the PTZ camera when the alarm is activated and ended. For the
PTZ camera end point, user can also select on preset position
or Auto Pan between preset position groups.
- Send to CMS (Central Management System)
Enable/disable the selected camera to send video to
CMS when the alarm is activated.
Beside the Send to CMS check box, click Detail. In the
CMS Setting, select the camera to enable/disable
sending the video to CMS. Enable All to select all
cameras. Then, click OK to accept the new settings and
Cancel to exit without saving.