AVer EH6216H+ user manual - Manual (Page 71)

63
CHAPTER 3
Detail: The setting of advanced IP cameras are related to the Intelligent Streaming function in System
setting. Click Detail. Click Default will back to the factory default value.
 Profile: For ONVIF connection only. User can select the setting value that provides by IP camera.
 Video Source: For ONVIF connection only. User can select the value that provides by IP camera.
The Profile and Video Source will be available when the IP camera hasn ’t been intergraded by
AVer and depend on the IP camera has supported.
 Stream Setting: user can setup Codec, Resolution, FPS, Bitrate Mode, and Quality Bitrate of
Stream 1, Stream 2, and Stream 3 on the selected IP camera channel. The Stream 1 is enabled in
default.
 Stream Selection: user can setup which stream (Stream 1 ~ Stream 3) to use on Record,
Preview(Quad and Single mode), and Remote site.
 Video Adjustment: user can adjust Brightness and Contrast of IP camera.
The stream setting only support for AVer IP camera series.