Canon BJ-30 - Manual (Page 79)

Chapter 5 Using the Operator Panel 71
Selecting a Control Mode
The printer’s Control mode determines whether the BJ-30 printer functions
in Canon BJ mode or Epson LQ mode. In Canon BJ mode, the printer
emulates any Canon Bubble Jet printer or the IBM Proprinter X24E. In
Epson LQ mode, the printer emulates the Epson LQ printers.
To set the printer’s Control mode, follow these steps:
1. Press the MENU button once.
❏ The printer beeps once when it enters Menu mode.
2. Press the MENU button two more times.
❏ The display shows the two control modes.
3. Press the button to select the desired control mode.
4. When the desired Control mode is blinking, press the ON LINE
button.
❏ The ON LINE light comes on.
❏ Printing in the selected control mode is enabled.
Using the
Operator Panel