Canon BJ-30 User Manual

Page 134

126

Customizing the Printer

Chapter 8

When you set this FUNCTION to OFF, memory reserved for the input and
download buffers is used exclusively as an input buffer. No download
buffer is maintained under these conditions.

Set this FUNCTION to ON when you want some memory to be used as a
download buffer. Of the total amount of memory reserved for the input
and download buffers, 3 KB is allocated for an input buffer and the
remainder is used as a download buffer.

FUNCTION 10: Automatic line feed (LF)
Use this FUNCTION to determine the type of carriage return. When this
FUNCTION is OFF, the printer performs a normal carriage return (CR
only). When this FUNCTION is ON, the printer follows each carriage
return with a line feed (CR + LF).

FUNCTION 11: Automatic carriage return (CR)
When this setting is OFF, the printer performs a normal line feed (LF only).
Set this FUNCTION to ON if you want the printer to perform a carriage
return after each line feed (LF + CR).

FUNCTION 12: Alternate graphics mode (AGM)
Set this FUNCTION to ON to enable Alternate Graphics Mode (AGM).
In this mode, the printer accepts high-resolution, 24-dot, all-points-
addressable (APA) graphics commands similar to those used with
conventional 24-pin printers.

FUNCTION 14: Character set
When this setting is OFF, the printer uses Character Set 1. When this setting
is ON, the printer uses Character Set 2.

FUNCTION 15, 16, 17, 18: Code page
These FUNCTIONs allow you to select the following code page tables.

FUNCTION Settings

Code page/Character set

437 USA, English

OFF

850 Multilingual (Latin I)

OFF

863 French Canadian

OFF

865 Norwegian

OFF

860 Portuguese

OFF

857 Turkish

OFF

855 Cyrillic

OFF

852 Slavic (Latin II)

OFF

864 Arabic

OFF

869 Greek

OFF