Canon BJ-30 - Manual (Page 21)

Chapter 2 Setting Up the Printer 13
Setting Up the
Printer
Connecting Your Printer to the Computer
Your printer has an 8-bit parallel interface port, which allows you to use it
with IBM PCs and compatible computers. You need to purchase a
Centronics-compatible, parallel interface cable from your dealer. Ask your
dealer for assistance if you need help selecting the right cable.
N
For reliable data communications between your computer and the printer,
use a short cable, six feet or less in length.
To connect the printer to the host computer, follow the steps below:
1. Make sure both the printer and the computer are turned off.
2. Connect the parallel cable.
❏ Align the cable connector with the printer’s interface port so the
shapes match.
❏ Gently press the cable connector into the port.
❏ Secure the cable connector by snapping the two wire clips (located
on the printer) into the cable connector.
3. Connect the other end of the interface cable to the parallel interface
port on your computer.