Canon BJ-30 - Manual (Page 52)

44 Using the Printer Chapter 3
3. Press the button until the number that corresponds to the test
pattern you wish to print is displayed:
Test Pattern Number
Current settings pattern 1
All modes pattern 2
Ripple pattern 3
Nozzle pattern 4
Hexadecimal dump 5
Demo pattern 6
Font pattern 7
4. Press the MENU button.
❏ The printer beeps and the test pattern starts to print.
When you print the Current settings pattern (see page 120), the Nozzle
pattern, or the Demo pattern, the printer returns to its previous state after
printing a page. When you print the All modes pattern, the Ripple pattern,
or the Font pattern, the printer continues printing until you cancel printing.
To cancel printing
You can cancel printing in one of the following two ways:
❏ Press the ON LINE button.
❏ Press the POWER button to turn off the printer.
N
If a printer error occurs, such as no paper ( E and 1 blink alternately), the
printer cancels the test pattern.