Canon BJ-30 - Manual (Page 105)

Chapter 7 Troubleshooting 97
Problem Cause Solution
Blinking F and other Other service call If you see a message
number errors consisting of the letter F in
combination with a number
(such as
F1 or F2 ) and the
printer beeps for about five
seconds, turn the printer off
and reconnect your AC
adapter. If this does not
cause the printer to stop
beeping, make a note of the
message number and call
your local Canon authorized
dealer.
Operational Problems
If you are having problems with the printer, check the problems and
solutions listed in the following table.
Problem Cause Solution
No power reaching The printer may not be Hold down the POWER
printer turned on. printer button until the
printer beeps.
The printer may not be Make sure the AC adapter
securely plugged into the is plugged securely into the
AC adapter. printer and into a wall outlet.
If the AC adapter is
connected to a power strip,
make sure the power strip is
connected to an outlet and
turned on.
The AC outlet may not be Check the AC outlet.
supplying power.
Troubleshooting