Canon BJ-30 - Manual (Page 45)

Chapter 3 Using the Printer 37
2. Prepare the envelopes.
❏ Arrange the stack of envelopes on a firm surface and press down
firmly on the edges to make the folds crisp.
❏ Press around the envelopes to remove any curls and expel air from
inside the envelopes.
❏ Also, press firmly on the area that corresponds to the edges of the
flap.
3. Insert the envelopes.
❏ Make sure the side you want to print on is facing you and the flap
is toward the paper support.
❏ Insert the top of the envelope first.
❏ Slide a stack of envelopes into the sheet feeder until it stops.
❏ Align the stack of envelopes with the right edge of the sheet feeder.
Using the Printer
PRESS DOWN FIRMLY ON
THE EDGES OF THE FLAP
FLAP