Canon BJ-30 - Manual (Page 29)

Chapter 2 Setting Up the Printer 21
Printing a Test Pattern
To check that you have properly set up the printer, you can print one of the
printer’s test patterns. The test patterns are described in detail in Chapter 3,
Using the Printer. For now, print the Demo pattern.
1. Make sure that the sheet feeder contains a stack of paper.
2. Make sure that the printer is turned on.
3. Press and hold down the MENU button until the printer beeps twice.
❏ The word FONT disappears and the number shown on the display
starts blinking.
4. Press the button five times until the number 6 appears on the
display.
5. Press the MENU button to start the Demo pattern.
After printing the Demo pattern, the printer stays on-line.
N
If lines are missing in the printed text or if there is no ink on the paper,
check that the BJ cartridge is installed correctly (as described previously in
this chapter). You may also need to clean the print head; see Cleaning the
Print Head on page 79 for instructions.
Setting Up the
Printer