Canon BJ-30 - Manual (Page 130)

122 Customizing the Printer Chapter 8
Factory Default Settings
The following table shows the factory default settings of the printer:
Function Setting
Printer control mode* BJ mode
Character pitch 10 characters per inch (cpi)
Line spacing 6 lines per inch (lpi)
Beeper Enabled
Automatic line feed (LF) Disabled (no LF with carriage return)
Slashed zero Disabled (zero not slashed)
Vertical tab stops No vertical tab set
Horizontal tab stops Column 9 (then every 8th column)
Vertical margins Top margin = first print line
Bottom margin = page length
First print line** 0.12 inch (3 mm)
Page length** 11 inches (279 mm)
Horizontal margins Left margin = 0
Right margin = maximum print width;
8 inches (203.2 mm)
Horizontal print position** Letter 0.26 inch (6.4 mm)
Print direction Bidirectional
Print quality* High quality (HQ mode)
Print media Plain paper
Font typeface* Courier
Character set* Character Set 1
Alternate Graphics Mode** Disabled
Code Page** 437—IBM USA
Buffer** Input: 35 KB
Download: 0 KB
Text scale mode** Disabled
Reduction mode** Disabled
Smoothing mode** Disabled
Automatic emulation switching
mode**
Disabled
Automatic power off** Disabled
Font typeface lock mode** Disabled
Low ink warning** Disabled