Canon BJ-30 - Manual (Page 17)

Setting Up the
Printer
Chapter 2 Setting Up the Printer 9
Selecting a Location for Your Printer
Whether at home, in the office, or traveling, you need to find a comfortable,
convenient and safe location for the printer. Follow these guidelines:
❏ Choose a flat, sturdy surface with enough space for the paper to flow
freely into and out of the printer. Angled print stands may cause
quality and reliability problems
.
❏ Open the paper support to ensure enough space is available for proper
operation. The printer requires this much space:
❏ Place the printer where the temperature is stable and set for human
comfort. Avoid areas of excessive heat or humidity as well as direct
sunlight.
❏ Do not leave the printer in a closed vehicle; this may expose the printer
to extremely high temperatures.
❏ Do not install the printer near devices that contain magnets or generate
magnetic fields (such as loudspeakers or base units of cordless
telephones). These devices can erase information on the printer’s
intelligent circuits.
❏ Do not subject the printer to strong physical shock or vibrations.
❏ Keep the printer clean. Dust accumulation may prevent the printer from
functioning properly.
❏ Do not place objects on top of the printer.
❏ To avoid damage, do not lift the printer by holding the paper support.
6.1” (153.8 mm)
10.5” (266 mm)
11.8” (300 mm)
PAPER SUPPORT
6.2” (157.6 mm)
4.30”
(107.6 mm)