Cooper Instruments & Systems DFI INFINITY B Ultra High Performance Digital Force Indicator - Manual (Page 45)

14.5 FLS.dSP Enter FLASHING DISPLAY CONTROL Submenu:
Press ‘RESET/ENTER’ 23) Display shows "SP1.FLS" Setpoint 1 Flashing.
Press ‘RESET/ENTER’ 24) Display flashes "dISAbL" disable (default) or previous selection of control option.
Press ‘MENU’ 25) Scroll though next available Setpoint/Alarm Display Flashing selections: "SP1.FLS",
"SP2.FLS", "AL1.FLS" and "AL2.FLS".
Press ‘▲/MAX’ 26) Display flashes "ENAbLE" or "dISAbL", select your choice of control.
Press ‘RESET/ENTER’ 27) Display advances to next Setpoint/Alarm Display Flashing or "bRIGHt" Display
Brightness Control Menu. If a change was made, the controller will also show "StOREd"
stored message momentarily.
14.6 bRIGHt Enter DISPLAY BRIGHTNESS CONTROL Submenu:
Press ‘RESET/ENTER’ 28) Display flashes "H.bRt" High Brightness Level.
Press ‘▲/MAX’ 29) Scroll though 3 different Display brightness level: "H.bRt" (high), "M.bRt" (medium)
and "L.bRt" (low) and select your choice of brightness level.
Press ‘RESET/ENTER’ 30) Display advances to "INP.CNF" Input Configuration Menu. If a change as made, the
controller will also show "StOREd" stored message momentarily.
CF 156 40 M2544/N/0505