Cooper Instruments & Systems DFI INFINITY B Ultra High Performance Digital Force Indicator - Manual (Page 44)

Press ‘RESET/ENTER’ 5) Display shows "dP.ActV" Decimal Point Effect Selection menu.
Press ‘RESET/ENTER’ 6) Display flashes "yES" (default) as confirming that the decimal point position is active
otherwise "NO" as independent.
Press ‘▲/MAX’ 7) To scroll or select the desired effect for your setting.
Press ‘RESET/ENTER’ 8) Display shows "StOREd" stored message momentarily then advances to "Set dP"
Decimal Point Setting menu.
Press ‘RESET/ENTER’ 9) Display shows "FFFFFF" (default) no decimal point option or previous selection of
decimal point location.
Press ‘▲/MAX’ 10) Scroll through the 6 available selection as 000000, 00000.0, 0000.00, 000.000,
00.0000, and 0.00000 for the suitable choice to match your selected input range and type.
Press ‘RESET/ENTER’ 11) Display advances to "FILtER" Filter Configuration submenu. If a change was made, the
controller will also show "StOREd" stored message momentarily.
14.4 FILtER Enter FILTER CONFIGURATION Submenu:
Press ‘RESET/ENTER’ 12) Display shows "CNt by" Counter by or round-off feature. (To enter, Press
‘RESET/ENTER’).
Press ‘MENU’ 13) Scroll through 3 available selections of Filter configuration: "CNt by", "FILt.tP" and
"FILt.tM". Refer to the flowchart below.
CNt by
Enter COUNT BY FILTER FUNCTION MENU:
Press ‘RESET/ENTER’ 14) Display flashes "001" (default) or previous setting value.
Press ‘▲/MAX’ 15) Scroll though 7 available selections: 001, 002, 005, 010, 020, 050 and 100 for your
choice of setting.
Press ‘RESET/ENTER’ 16) Display advances to "FILt.tP" Filter Type Selection Menu. If a change was made, the
controller will also show "StOREd" stored message momentarily.
FILt.tP Enter FILTER TYPE SELECTION MENU:
Press ‘RESET/ENTER’ 17) Display flashes "A.b.C.F IL" Adaptive Bandwidth Control Filter.
Press ‘▲/MAX’ 18) Scroll through 2 supported types: "A.b.C.F IL" or "MOV.AVE" (Moving Average) for
your desired option.
Press ‘RESET/ENTER’ 19) Display advances to "FILt.tM" Filter Type Selection Menu. If a change was made, the
controller will also show the "StOREd" stored message momentarily.
FILt.Tm Enter FILTER TIME SETTING MENU:
Press ‘RESET/ENTER’ 20) Display flashes "004" (default) or previous setting value.
Press ‘▲/MAX’ 21) Scroll though 8 available selections: 001, 002, 004, 008, 016, 032, 068 and 128 for
your choice of setting.
Press ‘RESET/ENTER’ 22) Display advances to "FLS.dSP" Flashing Display Setting Menu. If a change was made,
the controller will also show the "StOREd" stored message momentarily.
CF 156 39 M2544/N/0505