2 rear of the meter – Cooper Instruments & Systems DFI INFINITY B Ultra High Performance Digital Force Indicator User Manual
Page 12
4.2 Rear of the Meter
The following is a brief description of each part of the rear of the meter. The labeling on the top of the mounting sleeve
(not the case) identifies the location of the connectors found at the rear of the meter. Figure 4-2 shows this labeling.
Figure 4-2. Connector Label (AC-Powered and DC-Powered Detail)
Figure 4-3 shows the rear of the meter with the optional 4-relay output board, ethernet board and analog output board
installed.
Figure 4-3. Rear View
CF 156
7
M2544/N/0505