ClearOne Interact Manual - Manual (Page 64)

Chapter 2: Getting Started 59
OUTPUT SETTINGS - INTERACT Pro
The Output Settings window is used to customize and configure the audio being sent to the auxiliary device
that is connected to the Line Out jack on the INTERACT mixer. Line Output devices include Video Codecs,
CD Players, Amplifiers and Sound Cards.
» NOTE: Many of the most common Line Output devices have been pre-configured for optimal
performance with the INTERACT system. These devices are listed in the Device Toolbox.
Adding a Device Label
• Users can change the device label by clicking the text box next to the desired output label (for example:
Output 2). Replace the default label with a new name for the output.
• You can also add your Playback device to the Device Toolbox using the Device Toolbox Editor, which
allows you to specify the Manufacturer and Model.
Levels
l
evel
T
ab
1. Adjust the Output Gain using the slider control. Output Levels are monitored via the Output Level
Meter.
2. Click NOM (Number of Open Mics/Constant Level) to toggle NOM on and off. NOM maintains a
constant output level by automatically adjusting gain levels based on the number of mics gated on and
routed to the selected output channel. NOM reduces the output level proportionally by 3dB for every
doubling in the number of open mics (By default NOM is active).
3. Click Mute to silence the channel.