ClearOne Interact Manual - Manual (Page 43)

38 Technical Support: 800-283-5936
TELEPHONE SETTINGS - INTERACT AT
You can set user Telephone Preferences as well as Country and Flash settings in the Telephone Settings
window.
Telephone Settings
p
referenCes
• Select 2 Rings or 4 Rings for the Auto Answer setting, or Disabled if you want to manually answer
calls.
• Select Auto Disconnect if you would like INTERACT to disconnect when it detects loop-drop or call
progression.
• Select Audible Connect if you would like one tone to sound when the INTERACT is taken off hook and
two tones to sound when the INTERACT is on hook.
C
onfigure
r
inger
• Select from three available ringer melodies or deactivate the ringer. Click Ringer Test to hear the
selected ringer.
• Adjust ringer volume using the Ringer Level Slider.
p
rograM
l
oCal
n
uMber
• Enter the Local Number for the INTERACT system. This will display on the tabletop controller LCD.
C
onfiguraTion
• Select the Country or Region where the phone is being used (default is US/Canada)
• Select Flash duration from the Flash Settings list. This setting is dependent on your PBX system.
l
evel
• Receive ALC (Auto Level Control) is activated by default. ALC keeps the telephone audio level
consistent with audio levels coming from other sources If de-selected, the following options will be
available:
° Telco Receive Volume allows you to adjust incoming volume
` TEC: Click to activate Telephone Echo Cancellation. This feature cancels sidetone from the
Headset Receive.
` NLP: Click to activate Non-Linear Processing
` DTMF: Adjust the level of the DTMF tones that return to the room.
° Telco Transmit Volume allows you to adjust outgoing volume (always available)
• Click Ok to save your settings.