ClearOne Interact Manual - Manual (Page 47)

42 Technical Support: 800-283-5936
INTERACT Pro 8i
The INTERACT Pro 8i is an 8-microphone channel expansion unit, using an RJ-45 cable to connect with the
INTERACT Pro mixer.
Features of the INTERACT Pro 8i include:
Front
A. On/Off hook indicator
B. Microphone Indicator: Indicators show which microphone channels are active
C. Output Metering: Shows current meter level of output chosen as volume channel in the Dialer Window
Back
A. RS-232 Control Port: Only used for firmware recovery. The RS-232 Control Port CANNOT be used with
a 3rd-Party control system such as AMX, Crestron or an INTERACT Dialer
B. Link Out: Link output to connect ONLY to other INTERACT Pro peripheral devices
C. Link In: Link input to connect ONLY to other INTERACT Pro peripheral devices
D. Mic/Line Inputs: Mini-terminal push-on block connector for any combination of microphone and/or line
level inputs
E. Power Adapter Input: 12 VDC 2.5 A