ClearOne Interact Manual - Manual (Page 61)

56 Technical Support: 800-283-5936
TELCOS - INTERACT Pro
You can set user Telephone Preferences as well as Country and Flash settings in the Telephone Settings
window.
Telephone Settings
p
referenCes
• Select 2 Rings or 4 Rings for the Auto Answer setting, or select Disabled if you want to manually
answer calls.
• Select Auto Disconnect if you would like INTERACT to disconnect when it detects loop-drop or call
progression.
• Audible Connect: (Default = On) - Audible Connect is a courtesy tone letting the user know when the
phone is on or off hook.
C
onfigure
r
inger
• Select from three available ringer melodies or deactivate the ringer. Click Ringer Test to hear selected
melody.
• Adjust ringer volume using the Ringer Level slider.
p
rograM
l
oCal
n
uMber
• Enter the Local Number for the INTERACT system. This will display on the tabletop controller LCD.
C
onfiguraTion
• Select the Country or region where the phone is being used (default is US/Canada)
• Adjust the Flash Setting to the appropriate level for your Country and click Ok or Cancel to save your
settings.
l
evel
• Receive ALC (Auto Level Control) is activated by default. ALC keeps the telephone audio level
consistent with audio levels coming from other sources.
° Telco Receive Volume allows you to adjust incoming volume when ALC is turned off.
° Clear Effect: Click this button to activate Clear Effect
° DTMF: Adjust the level of the DTMF tones that return to the room.
° Telco Transmit Volume allows you to adjust outgoing volume (always available)
° Click NOM (Number of Open Mics/Constant Level) to toggle NOM on and off. NOM maintains a
constant output level by automatically adjusting gain levels based on the number of mics gated on
and routed to the selected output channel. NOM reduces the output level proportionally by 3dB for
every doubling in the number of open mics. By default NOM is active.
• Click Ok or Cancel to save your settings.