ClearOne Interact Manual - Manual (Page 46)

Chapter 2: Getting Started 41
INTERACT Pro
The INTERACT Pro is a mixer with eight (8) Mic Inputs, eight (8) Line Outputs, two (2) Line Inputs, Processing
Channels, four (4) Presets and a built-in Telephone Hybrid.
Features of the INTERACT Pro include:
Front
A. On/Off hook indicator
B. Microphone Indicator: Indicators show which microphone channels are active
C. Output Metering: Shows current meter level of output chosen as volume channel in the Dialer window
D. USB 2.0-Compatible Input
Back
A. Telephone Interface: Used to connect an analog phone line to the INTERACT
B. RS-232 Control Port: Used to connect to the INTERACT Software or control from a 3rd-Party controller
such as AMX or Crestron
C. Ethernet Port: 10/100 Mbps Ethernet port. The LEDs adjacent to the port indicate connection status
and packet traffic activity.
D. Link In: Link Input used to connect other INTERACT Pro peripheral devices ONLY
E. Mic/Line Inputs: Mini-terminal push-on block connector for any combination of microphone and/or line
level inputs
F. Line In: Mini-terminal push-on block connector for line level inputs only
G. Line Out: Mini-terminal push-on connector for line-level outputs
H. Power Adapter Input: 12 VDC 2.5 A