ClearOne Interact Manual - Manual (Page 23)

18 Technical Support: 800-283-5936
INTERACT COM / COM-W (WIRELESS)
INTERACT COM
The INTERACT COM is an interface device used to add USB Audio and Headset Audio to an INTERACT
system. The INTERACT COM provides all the features as the INTERACT COM-W except for the Wireless
feature as described below.
INTERACT COM-W (Wireless)
The INTERACT COM-W is an interface device used to add USB Audio, Headset Audio and a Wireless
INTERACT DIALER to an INTERACT system.
Product features include:
Front
A. Power Indicator
Back
A. Link In/Out Ports: Link Input and Output
Ports Connect G-link Enabled Devices to the
INTERACT COM and COM-W
B. HS Port: Connects a telephone headset to the
COM and COM-W
C. USB 2.0 Compatible Port: Connects USB
Devices to the COM and COM-W Unit
D. Control/Status Port: GPIO Port
1. Pin 1: Master Microphone Mute Control
2. Pin 2: Master Mocrophone Mute Status
3. Pin 3: On/Off Hook Control
4. Pin 4: On/Off Hook Status
5. Pin 5: 5 VDC (up to 40 mA)
6. Pin 6: Ground
E. Antenna (COM-W only): Allows Wireless
Communication for transfer commands
between the COM-W and the INTERACT Unit