ClearOne Interact Manual - Manual (Page 19)

14 Technical Support: 800-283-5936
Adjusting the Settings
You can select ringer melodies, adjust ringer volume, select the auto answer setting, and activate auto
disconnect, in the Settings menu.
T
o
s
eleCT a
r
inger
M
elody
1. Press to access the menu options.
2. Scroll to Settings and press .
3. Press again to select Ringer Melody
4. Select one of the three ringer melodies.
5. Press to save the selection and return to the Settings menu.
» Note: Once you select a melody, you will hear it played through the speakers.
T
o
a
djusT The
r
inger
l
evel
1. Press to access the menu options.
2. Scroll to Settings and press .
3. Scroll to Ringer Level and press .
4. Use or to adjust the volume.
5. Press to save and return to the Settings menu.
» Note: Ringer volume is indicated by a horizontal bar on the LCD screen.
T
o
s
eleCT
a
uTo
a
nswer
s
eTTing
1. Press to access the menu options.
2. Scroll to Settings and press .
3. Scroll to Auto Answer and press .
4. Select After 2 Rings or After 4 Rings.
-Or-
Select Disable to deactivate the Auto Answer function.
5. Press to save and return to the Settings menu.
T
o
a
CTivaTe
a
uTo
d
isConneCT
1. Press to access the menu options.
2. Scroll to Settings and press .
3. Scroll to Auto Disconnect and press .
4. Select Enable or Disable.
5. Press to save and return to the Settings menu.
» Note: When enabled, Auto Disconnect will automatically hang up the phone once the other
end is disconnected.