ClearOne Interact Manual - Manual (Page 20)

Chapter 2: Getting Started 15
Configuration
The configuration menu provides options for selecting countries, languages and RF as well as configuring
the Flash setting.
T
o
s
eleCT a
C
ounTry
1. Press to access the menu options.
2. Scroll to Configuration and press .
3. Press again to select Country.
4. Select the country where the INTERACT is being used from the list of
available countries.
5. Press to save the country selection and return to the Configuration menu.
» WARNING: This is assigned to the telco for the specific country settings. The country code
must be set correctly in software and the RF Controller to ensure that the unit operates
properly when connected to the telco network and that it complies with the country’s telco
requirements. Changing this code to a country other than the intended country of operation
might cause the INTERACT to be non-compliant.
T
o
s
eleCT a
l
anguage
1. Press to access the menu options.
2. Scroll to Configuration and press .
3. Scroll to Language and press .
4. Select a language from the list.
5. Press to save the language and return to the Configuration menu.
T
o
s
eleCT a
f
requenCy
1. Press to access the menu options.
2. Scroll to Configuration and press .
3. Scroll to Frequency and press .
4. Choose a frequency from 1–8.
5. Press to save the frequency and return to the Configuration menu.
» Note: The channel frequency allows the mixer to communicate with the controller. The
frequency in software must match the INTERACT controller frequency.