ClearOne Interact Manual - Manual (Page 44)

Chapter 2: Getting Started 39
LOUDSPEAKER SETTINGS - INTERACT AT
You can customize your loudspeaker audio in the Loudspeaker settings window of the INTERACT Software.
ClearEffect™
e
nable
C
lear
e
ffeCT
• Click the ClearEffect On/Off button. The indicator will turn green when ClearEffect is enabled. This
setting only effects Telco receive audio.
l
earn abouT
C
lear
e
ffeCT
• When ClearEffect is enabled, it causes the audio coming from the telephone line to emulate wideband
audio. It does this by adding high and low frequencies to the audio signal, creating a fuller sound. Using
this feature is optional.
Equalization
u
se
e
qualizers
• Increase and decrease the Low, Mid and High frequencies using the Equalization sliders. Levels can be
adjusted from +12 dB to – 12 dB.
l
earn abouT
e
qualizaTion
• Equalization in INTERACT Software is very similar to bass and treble adjustments on a stereo. Increasing
or decreasing the different frequencies allows you to customize loudspeaker audio and provide the
optimal listening experience for your users. Using this feature is optional.
Mute
• Click Mute to silence all output to the loudspeakers.
Meter and Volume
a
djusT
v
oluMe
• The loudspeaker volume has been optimized for use with the INTERACT system. You can increase or
decrease loudspeaker volume as desired.
l
earn abouT
M
eTers
• The meters are peak meters which show the audio level. The nominal level is -10 dBu. The meter bars
move from green to yellow to red as the volume increases. If the meter shows red, decrease the volume.
Red indicates clipping.