ClearOne Interact Manual - Manual (Page 25)

20 Technical Support: 800-283-5936
REGIONAL SETTINGS
You can set the date and time in the Regional Settings window to ensure accurate time stamp on log files.
The Regional Settings window is accessed through the Regional Setting toolbar button (or use the menu
option
Tools->Regional Settings).
Date / Time
s
eTTing The
l
oCal
T
iMe
1. Select the Local Time check box. The Local Time and Date boxes are now active.
2. Enter the current Date and Time.
3. Select Use Daylight Savings if your region observes daylight saving time.
4. Select the correct Time Zone.
5. Click Ok to save settings and close the window.
r
eferenCing a
T
iMe
s
erver
1. Uncheck the Use Local Time check box.
2. Enter the IP Address for the time server.
3. Select Use Daylight Savings if your region observes daylight saving time.
4. Select the correct Time Zone.
5. Click Ok to save settings and close the window.
If the device is connected to a network using DHCP, Time Server is included with DHCP options and will auto
populate depending on those settings.
EVENT LOG
The Event Log keeps a user-definable record of events such as passwords, dialing, reboots and errors. The
selected events are tracked and listed in the Event Log. The INTERACT software must be connected to a unit
to view the Event Log.
Using the Event Log
o
pen The
e
venT
l
og
• Click the Event Log toolbar button (or use the menu option Tools->Event Log)
T
raCk
e
venTs
• Select the events you would like to log
s
ave The
e
venT
l
og
1. Click the Save button
2. Name the file
3. Click Save. The log is saved as a .txt file
p
rinT The
e
venT
l
og
1. Click the Print button
2. Select the printer
3. Click Print