ClearOne Interact Manual - Manual (Page 36)

Chapter 2: Getting Started 31
DIALER - INTERACT AT
In addition to the INTERACT Controller, you can manage calls through the Dialer from within the INTERACT
Software. You can dial a number, redial the last dialed call, and disconnect calls. You can also use hook flash
function, mute the microphones and adjust call volume.
Making and Receiving Calls
o
pen The
d
ialer
» NOTE: A connection must be present for the dialer to work on the AT. A connection is not
necessary for the INTERACT Pro.
• Click the Dialer icon on the configuration screen.
M
ake a
C
all
1. Click the ON/OFF key. You will hear a dial tone.
2. Dial the number as you would on a standard phone. The number appears on the LCD screen as it dials.
C
all a
p
honebook
n
uMber
» NOTE: You can also pre-dial the number and then press the ON/OFF key to connect the call.
Press and hold the pound key (#) to enter a pause in the dialing string.
1. Select the number in the Phonebook list. The name and number appear in the display window.
2. Click the ON/OFF button to dial the displayed number.
» TIP: You can also double-click the number in the Phonebook list to initiate a call.
e
nd a
C
all
• Click the ON/OFF button.
r
edial a
n
uMber
• Click the Redial button.
s
end a
f
lash
s
ignal
• If your telephone service includes call transfer, call waiting or conference calling, you can use the Flash
button to invoke these features. Refer to your local telephone service provider for details.