ClearOne Collaborate Desktop User Guide - Manual (Page 82)

82 Collaborate Desktop: User Guide
C
ALL
F
ORWARDING
S
ETTINGS
NOTE: These settings are only available when you are connected to
Collaborate Central server. If you are not connected to Collaborate
Central, the Forward tab will not appear under Calls.
If your system is logged into Collaborate Central, Call Forwarding is available. Calls may be
forwarded to a specific party unconditionally, or if the local party does not answer, or is busy.
The Call Forwarding settings for your system may be done by both you and the system
administrator. The last changes, regardless of who made them, are valid.
To access the Call Forwarding Settings:
1. In the Control menu, choose Settings.
-or-
Open the Drawer and click the Settings tab.
2. Click the Calls and Forward tabs.
Unconditional forward
Select if you want to forward ALL calls intended for you to
another party.
Forward on busy Select if you want to forward calls to another party if you are
engaged in another videoconference.
Forward on no answer Select if you want to forward calls intended for you to another
party, if you cannot answer the call.
In each option’s accompanying box, enter the target party by one of the following methods:
1. Type the party’s directory number, IP address, DNS name or E.164 number.
-or-
Click Browse at the end of the row to open the Online Directory. Select a contact and
click OK,
Forward After
_____ Seconds
Enter the amount of time that will pass before Collaborate Central forwards
the call.
When you're finished setting the configuration, click Apply to implement the settings.