ClearOne Collaborate Desktop User Guide - Manual (Page 63)

Collaborate Desktop: User Guide 63
CONTROLLING A PAN / TILT / ZOOM (PTZ) CAMERA
If you and/or the remote party is using a Pan/Tilt/Zoom (PTZ) camera, you can control their
positioning. In addition, you can control the color settings of a local PTZ camera. In addition,
you may have to manually adjust the lens focus on the front of the camera.
NOTE: If the remote party is using a ClearOne videoconferencing
product, it may also control the positioning of your PTZ camera.
To control a PTZ camera:
 Through the Camera Controller:
 Click the Camera Controller button below the Local or Remote Video window.
In the Camera Controller, you can:
 Adjust the brightness, color, contrast and hue of the local video.
 Click the up and down arrow buttons to tilt the camera up and down.
 Click the left and right arrow buttons to pan the camera from side to side.
 Click the + button to zoom the view closer in or the – button to zoom the view
farther out.
You can store and recall up to 6 preset camera positions for repeated use.
 Within the Video Window:
 Place the mouse pointer inside the Video Window displaying video from a PTZ
camera. The pointer changes according to its location within the window. Press the
left mouse button (except where noted below) to move the camera.
Zoom in (left mouse
button) or zoom out (right
mouse button).
Tilt up left Tilt down right
Tilt up Tilt up right
Pan left
Tilt down Tilt down left
Pan right