ClearOne Collaborate Desktop User Guide - Manual (Page 81)

Collaborate Desktop: User Guide 81
Video port The ID of the port used for the video connection.
Audio port The ID of the port used for the audio connection.
NOTE: Participants must use the same video, audio and control ports.
Make sure that the ports you choose are available for every Participant.
Announce Every _____
Seconds
The interval between announcements of your Multicast in the
public viewer's schedule.
Refresh Video Every
________ Seconds
The maximum number of seconds required until the video
Multicast is synchronized for all viewers. If the refresh value is
low, the quality is lowered. If the refresh value is high, it will take
a longer time to see the video display when the viewers connect.
Use the default setting as a guide.
Defaults Click to return to the original settings. These settings help you
connect to the Interactive Multicast through the default ports
and/or IP address that was defined automatically by your
system.
When you're finished setting the configuration, click Apply to implement the settings.