ClearOne Collaborate Desktop User Guide - Manual (Page 71)

Collaborate Desktop: User Guide 71
AUDIO TUNING WIZARD
Using the Audio Tuning wizard, you can test and adjust the levels of your speakers, headset,
and microphone (or other audio source) to their optimum sound levels.
NOTE: The Audio Tuning wizard "remembers" your last setup. Whenever
a new call is initiated, the Audio Tuning wizard will set the audio
parameters to the configured setup.
To open the Audio Tuning Wizard:
 In the Video Window, click the Audio Tuning Wizard button .
To test and tune your audio devices:
1. Before starting the test, close all other applications on your system that play or record
sound. Keeping any of these applications open may distort the results of the Audio
Tuning wizard.
The Audio Tuning wizard contains separate sections. Depending on the type of device,
perform the appropriate Tuning tests in the wizard. If you work in Headset Mode, skip the
Speaker Mode pages by clicking Next without performing any action in those pages.
Speaker Mode Tune the audio levels of the external speakers and connected
microphone.
Headset Mode Tune the audio levels of the headset speakers and its attached
microphone.
2. In the Playback page, choose the sound card which generates the audio for the
Collaborate Desktop application.
3. Click Start. Music starts playing from the speakers. Move the Volume slider in either
direction until you hear the clearest audio output. Click Stop to exit the test.
Click Next to continue.
4. In the Record page, choose the sound card which generates the audio for the
Collaborate Desktop application.
5. Click Start and read the following line into the microphone (or camera if it contains a
built-in microphone):
" I am using the microphone setup wizard. It is checking to see whether my microphone
is plugged in and working properly. "