Bird Technologies SH-362S-Manual - Manual (Page 96)

74
Marker to Max Peak or Marker to Min Valley
Sets the marker to the either the maximum peak or minimum valley depending on
the functionality chosen in Markers Detect. See “Markers Detect” on page 73.
Marker to Next Peak Left or Marker to Next Valley Left
Cycles the active marker to the left through the points on the trace either from
highest peaks or lowest valleys (see “Markers Detect” on page 73) progressing
to the left.
Marker to Next Peak Right or Marker to Next Valley Right
Cycles the active marker to the right through the points on the trace either from
highest peaks or lowest valleys (see “Markers Detect” on page 73) progressing
to the right.
All Markers to Max Peaks or All Markers to Min Valleys
Sets all the markers to either the maximum peaks or minimum valleys depend-
ing on the functionality chosen in Markers Detect. See “Markers Detect” on
page 73.
All Markers Off
Turns off all markers on the trace.
Marker Delta
Turns On/Off and displays the delta of the one to five markers.
Marker Display
Marker Type
Sets the current marker to either be displayed as a line or floating
numbered icon.
All Markers Type to Icon
Sets all markers to be displayed as floating numbered icons.
All Markers Type to Line
Sets all markers to be displayed as numbered lines.
Marker Display
Turns On/Off and sets the location of the delta display into one of the four cor-
ners of the screen.
Marker More
Sets the properties of active markers through the following attributes: