Cable list, Velocity, Cable list velocity – Bird Technologies SH-362S-Manual User Manual
Page 71

49
Cable List
Select a specific cable from a list.
Note:
Custom cables can be added to the list. See “Customizing Sig-
Figure 34 Example, Distance-to-Fault - Cable Setting - Cable List
Velocity
Sets the speed of the signal going through the cable being measured.
Note:
Changing this setting cancels any selection on the Cable List
and changes that setting to “None.”
Figure 35 Example, Distance-to-Fault - Cable Setting - Velocity
Settings
Setting
This manual is related to the following products: