Bird Technologies SH-362S-Manual - Manual (Page 57)

35
Marker More
Sets the properties of active markers through the following attributes:
RSSI (Received Signal Strength Indicator)
Turns the audio indicator On or Off (an electronic ping). See “Received Signal
Strength Indicator (RSSI)” on page 92.
Volume
Sets the volume of the electronic ping generated from the RSSI.
Marker Freq to Center
Moves the current marker to the center frequency.
Limit Lines
Limit lines give notification of when a signal has reached or gone over a set mea-
surement amount. Limit lines can be moved with arrow keys.
Note: All valid traces are black, and any part of any trace that is out-
side of a limit is red. Red indicates a failed limit.
Limit Upper/Lower
Pick between upper & lower limit line.
Limit On/Off
Pick between limit line on or off.
Limit Alarm On/Off
Pick whether a limit line fail makes the unit beep.