Autocue QBox User Guide - Manual (Page 70)

Appendix C: Time Synchronisation
Time Synchronisation Daemon
Operational scenarios requiring synchronisation QBox
Installation & Operation
Guide
Issue #: 090924 ©2003-2009 Autocue Group Ltd 62 www.autocue-qtv.com
4. Press
E n t e r on the keyboard.
C.3: Time Synchronisation Daemon
Time Synchronisation Manager from Autocue supports three types of time signal source:
Auto Network Discovery. This method uses the pre-installed Bonjour software on the
QBox to locate all Time Synchronisation Daemons on the local network and synchronise with the
best time source.
If you want to use a particular computer as a time source, install the Bonjour software on it so that
it can be located by your QBox.
Local Clock. Selecting the Local Clock option on the QBox sets the device as the master
time source.
Network Host. When the Network Host option is selected you will have to manually enter
the IP address and host name of the machine that is to be used as the time signal source.