Basic operational checks – Autocue QBox User Guide User Manual

Page 25

Section 4: QBox Configuration and Operation

Basic operational checks

Configure and test the QBox

QBox
Installation & Operation
Guide

www.autocue-qtv.com

If video output is enabled, you also need to specify the composite standard. Press the
T a b key and S p a c e key to enable PAL or NTSC as appropriate.

7. Press the

T a b key to select O K and then the S p a c e key or E n t e r key to confirm your

selections.

OTE

If you try to deselect both Video and VGA you will get an error message

since at least one of these outputs needs to be selected.

Your QBox is now configured so that you can operate it in stand-alone mode with a prompter. You

can upload a script or rundown from a USB memory device and start prompting straight away.

If you wish to operate your QBox remotely using a computer running the QMaster software from

Autocue the following sections outline the procedures to configure the connection to the QBox.

4.2:

Basic operational checks

It is recommended that you conduct a number of operational checks to ensure that your QBox is

functioning correctly.