Autocue QBox User Guide User Manual

Page 62

Appendix B: Wireless Operation
Configure QBox for a wireless access point

QBox
Installation & Operation
Guide

www.autocue-qtv.com

9. Press the

T a b key and highlight the W E P option and press the S p a c e bar on the

keyboard.

10.Press the

T a b key until the W E P K e y field is highlighted and enter the required key.

This is usually a string of 26 alphanumeric characters.

OTE

Take care when entering the key as you must enter the same key for any

device that will be connected to the QBox.

11.Press the

C t r l and P a g e D o w n keys to select the I P v 4 S e t t i n g s tab and the D N S

S e t t i n g s tab.

OTE

The options selected for the IPv4 and DNS settings should match those

entered when configuring the network connection of the computer running

the QMaster software.

12.Press

R e t u r n on the keyboard to save your wireless network access settings.

13.Close the configuration interface on your QBox.

If the computer you are using to communicate with the QBox has already been configured you can

begin loading information and prompting scripts remotely.

OTE

You will need to check in QMaster that the QBox connection has been

established.

Select

P r o m p t > > QBox S t a t u s P a n e l and ensure that the QBox is

connected and, if there are more than one, at least one appears as Master.