Autocue MSP12 Master Series Teleprompter - Manual

Pro Plate
Guide
Head Balancing
1. To balance the head with the camera mounted, slide
the balance adjustment lever to the rear of the plate, the
plate will now slide freely back and forth. When you
have achieved a good balance slide the locking lever
forward, this will lock the plate in this position.
2. If extra counter-balance weight is needed it can be
added by installing a counter-weight on the rear of the
Pro Plate. (
A )
A
Counter-balance Weight
1. Install the
counter-balance
weight by sliding it
over the two tubes
at the rear of the Pro
Plate. Slide the
weight back and
forth to achieve a
balance.
2. To lock
the weight in
position tighten
the two clamp
screws on either
side. Additional
weights can
be added if
required.
2kg/4.4lbs
autocue.com