Autocue QBox User Guide - Manual (Page 66)

Appendix B: Wireless Operation
Configure QBox for wireless peer-to-peer connection
Configure the wireless interface on a computer QBox
Installation & Operation
Guide
Issue #: 090924 ©2003-2009 Autocue Group Ltd 58 www.autocue-qtv.com
B.3.1: Configure the wireless interface on a computer
You must also correctly configure the parameters of the wireless interface device on the computer
running the QMaster software.
Open the configuration tool for wireless LAN device that you have installed on your computer.
N OTE : Autocue strongly recommends NOT using the Windows Network
Configuration Wizard to set these parameters.
The controls for setting the wireless LAN parameters vary from device to device and will be
dependent also on the operating system your computer is using.
Ensure that the settings for parameters such as:
• encryption key
• SSID
• network name
• type of network
• address type
• channel number
are the same for all devices on the network.
N OTE : Contact your own IT department to obtain details of the required IP
addresses and related settings for the time source.