Licence upgrade – Autocue QBox User Guide User Manual

Page 55

Section 5: Upgrading QBox Components

QBox upgrades

Licence upgrade

QBox
Installation & Operation
Guide

www.autocue-qtv.com

9. Check that your QBox has been updated by pressing

F 5 when the QBox is in prompt

mode. The firmware version will be a higher number if the upgrade has been

successful.

5.1.2:

Licence upgrade

If you are upgrading QBox from a trial version you will require a new licence.

1. Contact Autocue to request a QBox permanent licence.

New licences will be emailed. The files will be in a compressed format contained in a

ZIP file.

2. Extract the new licence from the zip onto the root of a clean USB key.

3. Plug the USB key containing the extracted file into a USB port on the QBox. Wait

approximately 10 seconds for the USB key to be registered.

4. Press

F 8 on the keyboard connected to the QBox to open the configuration menu.

5. Use the

D o w n arrow key to select L i c e n c e U p g r a d e

6. The display screen will indicate that the files for the new version are downloaded and

copied to your QBox.

7. Check that your QBox has been updated by pressing

F 5 when the QBox is in prompt

mode. The licence expiry information will no longer be displayed.