Autocue QBox User Guide - Manual (Page 15)

Section 2: QMaster Application Architecture
QMaster and QBox operational scenarios
Large-scale field deployments
QBox
Installation & Operation
Guide
Issue #: 090924 ©2003-2009 Autocue Group Ltd 7 www.autocue-qtv.com
would be able to switch back so that the script or rundown is at the correct point when each of the
presenters delivers their part of the bulletin.
Multiple scroll controllers. More than one scroll control can be connected either to the
QMaster computer or to a QBox.
When multiple scroll controls are connected to the
QMaster computer, operators can switch
between different controls in order to find out the optimal scrolling capabilities of a controller.
When multiple scroll controls are connected to a single QBox, two presenters handling two
different scroll controls, are able to present from the same script.
2.1.2: Large-scale field deployments
A field scenario does not usually include a network infrastructure with pre-installed computers and
cables. A crew would normally deploy
QMaster on a wireless network, or set up direct QMaster
to QBox connections to alleviate the need for cumbersome and costly wiring.
Location shoot. A wireless network can be set up that allows QBox and a laptop computer
with
QMaster software already installed to be transported from one location to another. It is also
possible to create a scalable wireless network with
QMaster, which allows multiple QBoxes to
be connected to multiple wireless devices and prompters, making
QMaster suitable for use in
larger open-air situations with shots from different locations such as a sports broadcast or an
awards presentation ceremony.
2.1.3: Small-scale field deployments
In a small-scale field deployment, a QBox, computer and camera can be used by a news crew in
more restrictive locations such as when embedded with a military force or reporting fast-changing
emergency situations.
The wireless capability supports the use of remote scroll controls and downloading of scripts.
QBox on location. A QBox is usually deployed with a prompt display unit and a
connection to a computer running the
QMaster software. An operator would control the
prompting and make necessary changes to the script or configuration while the presenter and
cameraman do their work.
QBox has been designed to be independent of a computer when required. In a field scenario
without a computer it is possible to use alternative devices to control prompting.
Standalone QBox with an operator. An operator and a presenter can use a laptop
computer to control scripting or if deployed without a computer connect a USB memory device
direct to a QBox in order to upload scripts. As few or no physical connections are required, the
operator can follow a mobile camera and operate scripts remotely, while carrying the QBox and
prompt display unit. The presenter can present without handling equipment in situations such as
a walkabout documentary, or a shoot that requires varying angles and human movement.
Standalone QBox without an operator. When you have to prompt in inhospitable
locations you need to have as few people as practical and equipment that is lightweight and easy
to set up. This scenario allows you to have a crew consisting of a single presenter and a
cameraman. Scripts can be uploaded from a mobile phone or a USB memory device in order to
upload scripts. The prompter would be attached to the camera and the QBox carried on the
cameraman’s belt. As there is no operator, the presenter would use a wireless controller to scroll
pre-configured scripts stored on the QBox.