Loss of network connections – Autocue QBox User Guide User Manual

Page 42

Section 4: QBox Configuration and Operation
Configure the QMaster to QBox interface
Loss of network connections

QBox
Installation & Operation
Guide

www.autocue-qtv.com

11.Select the

Q B o x S t a t u s P a n e l from the P r o m p t menu. The Q B o x S t a t u s P a n e l

dialogue box is displayed.

12.Right-click in the dialog box and select

A d d to display the C o n f i g u r e QBox dialog

box.

13.In the

N a m e field type an identifier for the QBox if desired.

14.Enter an optional description in the

D e s c r i p t i o n field.

15.Enter the details for your QBox (that you noted in step 10 above) in the

I P A d d r e s s

field and click

O K . The Q B o x S t a t u s P a n e l is displayed again.

16.Click on

R e c o n n e c t . The icon next to your QBox name changes to a light blue colour

to show that a connection has been established, as illustrated below.

Configuration of your QBox is complete and you can now use it to control prompting.

4.7.1:

Loss of network connections

The network connection between a QBox and the QMaster software will be broken by either the

network plug being removed or the software on either device being shut down.