Autocue QBox User Guide User Manual

Page 50

Section 4: QBox Configuration and Operation
Load files onto a QBox remotely
Transfer via a Bluetooth® device

QBox
Installation & Operation
Guide

www.autocue-qtv.com

OTE

Runorder folders are single level directories and do not support nested

folders.

Device pairing.

You can pair your Bluetooth device with any number of QBoxes in order to

provide additional security and reduce the time taken to upload files.

1. Initiate pairing on your Bluetooth device.

2. Following the commands displayed on your device.

3. When requested, enter the Portable Identification Number (PIN) for the QBox.

The default PIN for a QBox is 1234.

OTE

A QBox will pair with any device that provides the correct PIN. Files from

devices that do not support pairing will be accepted by a QBox.

Format.

Save the files as plain text files (with the extension .txt) and ensure that the encoding

for the file is UTF-8. Any file in an alternative format sent to a QBox will be rejected.

OTE

Files in other formats may be sent to a QBox but will not be able to prompt

them.

Select files to be prompted.

1. Press the F2 button on the keyboard connected to the QBox to open the QBox On

Screen Display menu. Alternatively, you can also press F1 to access the Select Data

Source menu.

2. Select Load Runorder.

OTE

If no keyboard is attached, use the appropriate button on a connected scroll

controller.