Autocue QBox User Guide User Manual

Page 54

Section 5: Upgrading QBox Components
QBox upgrades
Firmware upgrade

QBox
Installation & Operation
Guide

www.autocue-qtv.com

3. Press

[ F 5 ] on the keyboard. QBox system information similar to below will be

displayed.

4. Ensure that your QBox is NOT in prompt mode.

5. Plug the USB key containing the extracted files into a USB port on the QBox. Wait

approximately 10 seconds for the USB key to be registered.

6. Press

[ F 8 ] on the keyboard connected to the QBox to open the configuration menu.

7. Use the

D o w n arrow key to select F i r m w a r e U p g r a d e .

8. The display screen will indicate that the files for the new version are downloaded and

copied to your QBox.