Rockwell Automation GV3000/SE AC Drive 1-20HP, 230VAC Ver. 6.04 Hdwe Ref, Install, Troubleshooting - Manual (Page 15)

2-1
About the Drive
Figure 2.1 – Identifying the Drive Model Number
C
HAPTER
2
About the Drive
This chapter describes how to identify the drive using the model number matrix and
illustrates the differences between the NEMA enclosures. Major components of
each drive group are also shown.
The GV3000/SE AC drive is a PWM (Pulse-Width-Modulation) drive that provides
vector and general purpose regulation for a wide range of applications.
Using vector regulation, the drive can provide high dynamic response, maintain full
rated motor torque to zero speed, and precisely control motor speed in both
directions. The drive can provide this functionality either with encoder feedback
(flux vector control or FVC) or without (sensorless vector control or SVC).
Using general purpose (volts/hertz or V/Hz) regulation, the drive is suited for a
broad range of applications requiring adjustable speed control of motors.
2.1 Identifying the Drive by Model Number
Each GV3000/SE AC drive can be identified by its model number. See figure 2.1.
This number appears on the shipping label and on the drive's nameplate. The
drive's model number includes the Power Module and the regulator. Drive power
ratings are provided in table 2.1.
Horsepower Ratings
1 = 1 HP
2 = 2 HP
3 = 3 HP
5 = 5 HP
7 = 7.5 HP
10 = 10 HP
15 = 15 HP
20 = 20 HP
GV3000
V = V/Hz or Vector
Voltage
2 = 200 - 230 VAC
Enclosure
1 = NEMA 1
2 = NEMA 12 Only
4 = NEMA 4X (Indoor Only) or NEMA 12
Regulator Version
60 = Vector and V/Hz Regulator
NN V 2 N NN