Rockwell Automation Liqui-Flo 1.5 General Purpose and Vector Duty - Manual (Page 69)

Parameter Descriptions 4-37
Derivative gain for the bus regulator. Used to control regulator overshoot.
This parameter is not used with LiquiFlo AC drives.
Enables/disables the function which reconnects to a spinning motor at actual RPM
when a start command is issued.
Adjusts the responsiveness of the flying start function. Increasing the value in this
parameter increases the responsiveness of the flying start function.
165 Bus Reg Kd
Range: 0 to 10000
Default: 1000
Access: 1 Path: Dynamic Control>Stop/Brake Modes
See also:
168 Start At PowerUp
Range: 0 = Disabled
Default: 0 = Disabled
Access: 0 Path: Dynamic Control>Stop/Restart Modes
See also:
169 Flying Start En
Range: 0 = Disabled
1 = Enabled
Default: 0 = Disabled
Access: 1 Path: Dynamic Control>Stop/Restart Modes
See also: 170
170 Flying StartGain
Range: 20 to 32767 [1]
Default: 4000
Access: 1 Path: Dynamic Control>Restart Modes
See also: 169