Rockwell Automation Liqui-Flo 1.5 General Purpose and Vector Duty - Manual (Page 22)

2-10 LiquiFlo 1.5 AC Drive, Software Reference Version 1.2
2.7.3 Customizing the Function Keys
The function keys (F1, F2, F3, and F4, also called F-Keys) on the OIM can be
customized to perform several pre-configured functions when the process display
screen is active.
Up to eight function keys can be configured. Pressing while the display screen is
active toggles between each set of four functions.
As shipped from the factory, the F4 key is configured for the Clear Fault Queue
function.
To assign a function to an F-Key, select the Display icon from the Main Menu as shown
in figures 2.9 and 2.10.
The F-Key definitions are the same for all OIMs connected to the drive, regardless of
the port used.
Figure 2.9 – Accessing the Function Key Configuration Screens
Monitor Lang
P0: LiquiFlo 1.5
Auto Stopped
Main Menu
Display
Display:
Monitor
Language
Function Keys
Clears function key
(returns key to
undefined state)
See figure
B.10
Function List
F2: Undefined
F3: Undefined
F1: Undefined
ClrFK